When a property manager calls about a panel that keeps tripping, or a contractor needs a circuit roughed in before a tenant moves back in, that call lands with us. We handle electrical work for rental properties, small businesses, and homeowners throughout West Columbia, and the work gets scoped on the phone before anything is scheduled. Whether it is a single outlet that stopped working or a full panel replacement, you get a clear picture of what is involved before anyone is booked.
West Columbia is a town where the housing stock covers a wide range of ages and configurations, and the electrical work reflects that. Older homes with wiring that predates current code, newer construction that needs additional circuits, and commercial spaces being converted or built out all come through on a regular basis. We handle the full range of residential and commercial electrical work in this area, available every day from 9:00 AM to 8:30 PM.
Older properties in West Columbia and the surrounding area often carry wiring that was installed to a standard that made sense at the time. Knob-and-tube wiring, common in homes built in the first half of the last century, was designed for a load that a modern household puts through in a fraction of the day. It has no ground wire, which means it cannot support the grounded outlets that current code requires, and insulation that has aged decades past its intended life can become a hazard without any visible warning.
Aluminum wiring, used widely in residential construction during a period when copper prices spiked, is a different problem. The wiring itself is not the issue so much as what happens at the connections over time. Aluminum expands and contracts at a different rate than the devices and outlets it connects to, and that movement loosens connections and creates heat. Remediation does not always mean replacing every wire in the house. Sometimes it means addressing the connection points with the right materials and hardware, and sometimes it means replacing a section that has deteriorated past the point of repair. We assess what is there and explain what needs to happen before any work is quoted.
Grounding and bonding are part of the same conversation. A house that was wired before grounding was standard may have three-prong outlets installed over two-wire circuits, which looks correct and is not. We check for that during any inspection and flag it before it becomes someone else's problem.
An inspection is the right starting point when you are buying a property, listing one, or dealing with a code violation that has been flagged. We go through the panel, the wiring, the outlets, and the grounding to give you a clear account of what is current and what is not. For landlords in West Columbia managing rental units, an inspection before a tenancy starts is a straightforward way to document the property's condition and catch anything that needs attention before a tenant moves in.
A panel that trips under normal load, or one that cannot support the circuits a property now needs, is not a problem that resolves itself. We run a load calculation to confirm what the replacement needs to carry, handle the service-entrance work where the incoming capacity needs to be increased, and wire the new panel to current standards. Arc-fault and ground-fault breakers go in where the code requires them. Panel and wiring work is finished to code, and the scope is confirmed on the call before anything is scheduled.
Ground-fault protection is required in kitchens, bathrooms, garages, and outdoor locations because those areas carry moisture risk. Arc-fault protection applies to bedrooms and living areas. Many properties in this area were wired before either requirement existed, and a lot of the outlets that look compliant are not wired to be. We install both types correctly, including the upstream protection that covers multiple outlets from a single device where the layout allows it.
A point-of-entry surge protector installs at the panel and catches voltage spikes before they reach any circuit in the house. In a region where summer thunderstorms move through with enough regularity to make the news, that matters. A surge that travels through the power line can damage appliances, electronics, and the wiring feeding dedicated circuits throughout the property. It is a single service call, and it covers the whole house from one installation point.
Outdoor outlets need the right box, the right cover, and the right GFCI protection for the exposure they will see year-round. A standard indoor outlet installed outside, or an outdoor outlet with a cover that does not seal correctly, is a code problem and a safety problem. We install weatherproof outlets and enclosures for decks, garages, outbuildings, and exterior walls, and run new circuits where the existing layout does not reach.
A Level 2 EV charger requires a dedicated 240-volt circuit sized to the charger's specifications. In an older home where the panel is already carrying a full load, that conversation sometimes leads to a panel upgrade before the circuit is run. We scope that on the call, so you know whether the charger installation is straightforward or whether the panel needs to be addressed first. The wiring done properly, start to finish, is what makes the charger safe to use daily.
If you've never hired an electrician before, the question of how scheduling works is usually the second one after price. When you call, we go through the situation, scope the work, and confirm what is available before anything is booked. For problems that will not keep, we take short-notice calls when the schedule allows, and emergency faults are answered within our daily hours of 9:00 AM to 8:30 PM, every day.
For tenants and businesses that cannot simply clear the space and wait, we work around what the property requires. A retail space that needs to stay open, a rental unit with a tenant in place, or a home where someone is working from a room that cannot go dark all call for a different approach to sequencing the work. We talk through that on the call and confirm what the visit will involve before anyone arrives.
You get a straight answer about the work before it is scheduled. That applies to scope, to what the visit covers, and to what would change the quote if the job turns out to be more involved than the initial description.
Apartments and condos in West Columbia present a specific set of questions about who owns what. The panel that serves a unit is sometimes inside the unit, sometimes in a shared utility space, and sometimes split between the two. When part of the electrical service is shared with common areas or other units, the work inside the unit and the work on the shared infrastructure are separate conversations, and the second one usually involves the building owner or the property manager.
We handle the electrical work within the unit: outlets, switches, fixtures, the panel that serves the unit directly, and any dedicated circuits that run to appliances inside the space. For work that touches shared infrastructure, we can assess what is inside the unit and explain where the boundary falls, so you know who to contact about the parts that are not yours to authorize. Landlords and property managers who handle multiple units in West Columbia call us for the same reason: a clear account of what the work involves and what falls within the scope of the individual unit.
Quick to arrive. Careful with your home. Clean when we leave. Callers from West Columbia often look at our page of electrical services before they call.
Electrical pricing depends on what the job involves, and the job has to be scoped before a number means anything. What moves a quote is the nature of the fault, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being made. A panel that needs a single breaker replaced and a panel that needs to be fully replaced and upgraded to a higher service capacity are not the same job, even if the symptom that prompted the call looked similar.
When you call, we go through what the situation is and give you a rate before anything is scheduled. That applies to panel work, EV charger circuits, rewiring, inspections, and everything else on the list. The price is confirmed before we book, and you decide from there. If the work turns out to involve something that was not visible or described during that first conversation, we explain what changed and what it means for the cost before proceeding.
Reach out and we'll get it diagnosed.
We serve West Columbia and the communities throughout the surrounding area, including Springdale, Oak Grove, Olympia, St. Andrews, and Cayce. The broader coverage extends across Lexington County, and most calls in this part of South Carolina fall within our range.
If you are outside West Columbia but nearby, call and we will confirm coverage for your address. We answer when you call. We explain the work. We leave it safe.
Yes. Kitchens and bathrooms have specific code requirements for circuit counts, GFCI protection, and outlet placement that do not apply to other rooms. During a rewire, those rooms are wired to meet current requirements for their specific use, which often means more circuits than were originally there.
A fault that only appears when a circuit is under load often points to a connection that is loose or a wire that is undersized for the current being drawn. It can also indicate a failing breaker that holds at rest but trips when it is asked to carry the full load. We test under load conditions to reproduce the fault and trace it to its source.
Yes. We protect floors and finishes while we work, which matters especially in finished spaces where the last thing anyone wants is marks or damage from the job. Drop cloths and other protective measures are part of how we work.
Permit requirements depend on the type of work, where it falls within the property, and the jurisdiction that governs that address. We confirm what applies at your address before the work is scheduled, so you know what the process involves before anything starts.
It often does. Older rental units may have wiring or panel configurations that predate current code requirements for GFCI and AFCI protection, grounded outlets, and adequate circuit capacity. A pre-tenancy inspection gives the landlord or property manager a clear account of what is in place and what needs attention, which is a useful record regardless of what the inspection turns up.
We coordinate access with whoever is managing the property and confirm the details on the call. The job is scoped the same way as any other visit, and we do not require the owner to be present as long as access is arranged in advance.
For work that involves cutting into walls or ceilings, we take steps to contain the dust to the work area. This includes covering nearby furniture and flooring and cleaning up the work area before we leave.
Older properties in this area frequently turn up knob-and-tube wiring, aluminum wiring at the connections, and panels that were sized for a fraction of what a modern household draws. Grounding is another common gap: three-prong outlets installed over two-wire circuits look correct but are not, and we flag that during any inspection. The fix depends on what is there, and we explain it before any work is quoted.
We cover West Columbia and the surrounding communities in Lexington County, from Cayce and Springdale to St. Andrews and Oak Grove.
If you are in the area and need electrical work scheduled, call (839) 269-9878.
We are available every day from 9:00 AM to 8:30 PM. Call Lexington Electrical Company and the work gets scoped before anything else happens.
Local coverage. Safe wiring. Costs explained before we start.
The rest are on our coverage map. Close by, we also take electrical work in: Springdale, Oak Grove, St. Andrews, Cayce, Seven Oaks.
Below is a plain-language look at the electrical services we handle in West Columbia and across Lexington County. Each row covers what the service involves, who it fits best, and one practical detail worth knowing before you call. If a situation is not listed exactly, call us and we will scope it on the phone.
| Electrical Service | What's Included | Best For | What to Keep in Mind |
|---|---|---|---|
| Backup Generator Installation |
| Lexington County homeowners who lose power during summer thunderstorms or winter ice storms and want a reliable hookup ready before the next one | The transfer switch isolates the home from the utility line during generator operation. That step is not optional. We handle the wiring and switching. The generator unit is a separate purchase. |
| Electrical Panel & Service UpgradesMost Popular |
| Older West Columbia homes adding appliances, EV chargers, or generator capacity to an undersized panel | Many homes in Lexington County still carry 100-amp service. A panel upgrade involves a load calculation, service-entrance coordination, and wiring the new panel to current code standards. |
| Dedicated Appliance Circuits |
| Homeowners adding a high-draw appliance that should not share a circuit with other devices | A dedicated circuit sized correctly to the appliance protects both the equipment and the wiring feeding it. We confirm the right breaker size before the circuit is run. |
Call (839) 269-9878 to get a quote on any of the services above. We are available every day from 9:00 AM to 8:30 PM and will scope the work on the call before anything is scheduled.
(839) 269-9878